Best Gift Shopping > Radiant Floor Heating > Radiant Floor Heating
|
|
Best Gift Shopping > Radiant Floor Heating > Radiant Floor Heating
|
|
Zurn 1/2' Pex Tubing to Manifold Connectors,(Pair) - Part #QHMMC3(more) »rank: 20676from: ZurnOur review: :Used to connect Zurn 1/2' Pex Tubing to Zurns QickZone Manifold or Zurns Preassembled Manifold (#QHPM). To connect the tubing to the manifold you first make sure that the tubing is cut to length with a straight cut free of burrs. Slide the nut over the tubing with the threads facing the manifold, then slide the split ring over the tubing. Insert the barbed fitting into the tubing. Insert the O-Ring end of the barbed fitting into the Manifolds port, slide the nut and split ring up the tubing and thread the nut onto the Manifolds port. Use a wrench ... Detail |
Nuheat Programmable Thermostat - NTG5110(more) »rank: 29629from: NuheatOur review: :This fully programmable thermostat offers you four settings per day as well as the ability to select the exact floor temperature. This unit also has built-in ground fault protection. Detail |
||
Zurn Preassembled 3 Port Radiant Heating Manifold - Model # QHPM-3(more) »rank: 26012from: ZurnOur review: :Zurn has changed the look of this Manifold. The new style has the thermometer in the ball valve and the vent assembly at the end. They both have the same features. You will receive one of the styles pictured above. The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. To divide the loops into zones the Installer can replace the Return port valve handles ... Detail |
Zurn Zone Valve Actuator with End Switch - Part #QHMBMVDS(more) »rank: 30881from: ZurnOur review: :Installing Zurn Zone Valve Actuators on all of the circuits of the return header allows the user to group one or any combination of loops together into zones. To install the actuator you must first remove one of the white plastic caps on the return header. To remove the white plastic cap turn it counterclockwise until completely open, then use a flat ended screw driver to pry the cap up and off. Place the plastic fitting that comes with the actuator onto the return circuit that the plastic cap came off of by lining up the notch in the plastic ... Detail |
||
Zurn 3/4' Pex Tubing to Manifold Connectors,(Pair) - Part #QHMMC4(more) »rank: 33408from: ZurnOur review: :Used to connect Zurn 3/4' Pex Tubing to Zurns QickZone Manifold or Zurns Preassembled Manifold (#QHPM). To connect the tubing to the manifold you first make sure that the tubing is cut to length with a straight cut free of burrs. Slide the nut over the tubing with the threads facing the manifold, then slide the split ring over the tubing. Insert the barbed fitting into the tubing. Insert the O-Ring end of the barbed fitting into the Manifolds port, slide the nut and split ring up the tubing and thread the nut onto the Manifolds port. Use a wrench ... Detail |
RugbuddyTM 165w Under Rug Space Heater (3' X 5')(more) »rank: 22247from: Speedheat®Our review: : Detail |
||
Zurn, 1 Zone Pump Relay Control. Model #QHMZ1P(more) »rank: 34464from: ZurnOur review: :This relay simplifies the wiring between the thermostat (such as QHSTHO), zone pump and boiler. Detail |
Zurn Preassembled 5 Port Radiant Heating Manifold - Model # QHPM-5(more) »rank: 39413from: ZurnOur review: :The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. The Supply and Return ports can accept 3/8', 1/2', 5/8' or 3/4' Zurn pex tubing by attaching the appropriate tubing to manifold connectors (Sold Separately). (QHMMC2= pair, 3/8'manifold connectors),(QHMMC3= pair, 1/2'manifold connectors),(QHMMCJ= pair, 5/8'manifold connectors),(QHMMC4= pair, 3/4'manifold connectors). The GPM flow rate can be adjusted at each supply port by removing the front plastic cap ... Detail |
||
1/2 ' x 1000 ft PEX O2 Barrier Radiant Heat Tubing(more) »rank: 38693from: Golden TouchOur review: : Detail |
Zurn Preassembled 11 Port Radiant Heating Manifold - Model # QHPM-11(more) »rank: 38954from: ZURNOur review: :Zurn has changed the look of this Manifold. The new style has the thermometer in the ball valve and the vent assembly at the end. They both have the same features. You will receive one of the styles pictured above. The Zurn Preassembled Radiant Heating Manifold is the smart choice for controling the fluid distribution in a hydronic Radiant Heating System. It's designed for easy filling, purging, isolation and zoning. It provides constant access to supply and return fluid temperatures and individual loop flow rates. To divide the loops into zones the Installer can replace the Return port valve handles ... Detail |